Methodology and sources
Every number on WattRunCost is made in the open. This page publishes the whole method: the arithmetic, the two judgment calls that affect results (and exactly how), how each rate was sourced and dated, the complete source table for all 62 jurisdictions, and the limits of what an estimate can tell you.
How every calculation works
The core arithmetic never changes: watts divided by 1,000 give kilowatts; kilowatts multiplied by hours give kilowatt-hours; kilowatt-hours multiplied by the rate give the cost. Seven small calculation engines share that core — one for appliance costs, one for pure kWh usage, one that totals a multi-item bill, one that works backwards from a real bill to a true rate, one for EV charging, one that compares Ontario's three plans, and one for LED savings. Each calculator page calls the engine it needs and shows a worked example whose inputs and outputs you can reproduce by hand. Money is rounded to the nearest cent at the point of display; nothing is rounded mid-calculation in a way that would move a printed figure.
The 30-day month rule
Wherever a calculator shows a monthly figure, it is the daily figure multiplied by 30 days. Yearly figures are the daily figure multiplied by the real 365 days. Calendar months run 28 to 31 days, so no monthly conversion is exact; thirty days is the standard billing-estimate convention, and it is the convention behind every worked example on this site — a 1,500 W space heater at eight hours a day is 360 kWh a month, $52.56 at Ontario's mid-peak price.
The consequence is stated wherever it matters: monthly times twelve (360 days) does not equal the yearly figure (365 days). The difference is about 1.4 percent, and it is intentional — the monthly figure mirrors a typical bill month, the yearly figure is the true calendar total. The rule applies to displayed monthly estimates in the appliance, usage, bill, EV and LED calculators. It does not touch per-hour or per-day figures, the Ontario plan comparison (which works from your actual monthly kWh), or utility thresholds such as Ontario's 1,000 and 600 kWh tiered limits, which are applied exactly as the utility publishes them. Every page that shows a monthly figure carries the line: "Monthly figures use a 30-day month."
Ontario plan comparison: the default splits, in full
Ontario's Time-of-Use and Ultra-Low Overnight plans price when electricity is used, so comparing plans from a single monthly total requires an assumption about how that usage spreads across the day. Rather than hide the assumption, the Time-of-Use Calculator shows it beside the results, in these words: "Default split: a typical household with no load shifting. Your real split is on your bill — adjust the sliders to match it." The defaults come from a validated 700 kWh household profile — the same unshifted lifestyle mapped into both plans, so neither plan gets a head start:
| Plan | Period | Default share | Basis (of 700 kWh) |
|---|---|---|---|
| Time-of-Use | Off-peak | 64% | 450 kWh |
| Time-of-Use | Mid-peak | 19% | 130 kWh |
| Time-of-Use | On-peak | 17% | 120 kWh |
| Ultra-Low Overnight | Ultra-low overnight | 11% | 80 kWh |
| Ultra-Low Overnight | Weekend off-peak | 26% | 180 kWh |
| Ultra-Low Overnight | Mid-peak | 34% | 240 kWh |
| Ultra-Low Overnight | On-peak | 29% | 200 kWh |
| Tiered | — | No distribution | Price depends only on total kWh vs the seasonal threshold |
A household that shifts load — charging an EV overnight, running the dishwasher after 11 p.m. — should move the sliders to match its real split and watch the Ultra-Low Overnight plan improve. That is the tool's purpose. The Tiered plan needs no split: its price depends only on the month's total against the seasonal threshold (1,000 kWh in winter, 600 kWh in summer).
How rates are sourced and dated
Every jurisdiction record behind this site carries four things: the rate, the name of the source it was read from, the source's address, and the date it was last verified. A record missing any of the four is not published. Canadian figures are regulated residential rates read from the regulator or utility that sets them — the Ontario Energy Board, Hydro-Québec, the British Columbia Utilities Commission and their peers. US figures are the Energy Information Administration's average residential prices (total revenue divided by total sales, Form EIA-861M) for August 2026 — averages, not tariffs, and preliminary figures that the EIA may revise. Appliance wattages start from the U.S. Department of Energy's typical-wattage list, cross-checked against utility guides.
Wherever a page shows a rate or loads one into a calculator, the rate's source and last-verified date appear beside it, together with the standing reminder that defaults are estimates and your bill is the authority. Rates are re-checked on a quarterly cycle: values and verification dates are updated together, and a value whose source cannot be re-read at a pass keeps its older date — the date shown is always the date the value was actually last verified, never the date the file was touched. Three items are already flagged for the next pass: Newfoundland and Labrador's figures should be re-read directly from the Public Utilities Board order rather than a reproduction; the EIA's preliminary 2026 averages should be re-pulled after revision; and Alberta's Rate of Last Resort expires December 31, 2026, so its successor must be picked up when published.
The full source table
All 62 jurisdictions, exactly as the calculators use them. Canadian rates are in Canadian cents per kWh; US rates are in US cents per kWh. Ontario's entry lists its plan prices because the province has no single default rate.
The limits of an estimate
These calculators estimate; they do not bill. A default rate is a published average or a regulated energy charge, and a real bill adds delivery, regulatory charges, riders and taxes that vary by utility and municipality — in Ontario, the Ontario Electricity Rebate then reduces the pre-tax subtotal. Appliance draw varies with settings, age and conditions, and hours are always an estimate of behaviour, not a measurement. Treat every result as a well-sourced approximation with its working shown, use your own bill's rate wherever you can, and treat your utility — not this site — as the authority on what you owe.
Frequently asked questions
Why doesn't the monthly figure times twelve equal the yearly figure?
Because the two figures use different, deliberate conventions: monthly means a 30-day month (360 days across twelve of them) and yearly means the real 365 days. The gap is about 1.4 percent. The monthly figure matches how people read a typical bill; the yearly figure is the true calendar total. Both are labelled, and the rule is published here rather than hidden.
Where do the Ontario plan-comparison defaults come from?
From a validated 700 kWh household profile with no load shifting — a household that uses electricity whenever it happens to need it, spread across the day and week the way an unshifted home uses it. The exact splits are published in the table on this page and shown beside the results in the calculator itself, and every slider is yours to move.
What if a rate on this site is wrong?
Tell us — the contact page explains what to include so a correction can be verified fast. Every rate here was read from its official source on the date shown, but rates change and documents get reissued. A verified correction is applied to the data, the verification date is updated, and the fix flows to every calculator that uses the figure.