Rates updated: November 2026 Sources: EIA · OEB · provincial utilities Calculations run in your browser — nothing is uploaded.

Electricity Bill Calculator

Build your home out of the appliances that use power — a fridge here, a space heater there — and this estimator adds them into a monthly electricity bill: total kWh, energy cost, and the per-appliance breakdown that shows where the money goes.

Estimate your monthly electricity bill

Appliance 1

Appliance 2

Sets the default rate below. You can always type your own rate instead.

Ontario has no single electricity price — pick the plan and time block to price the whole list at, and the rate fills in. Prices are the energy charge only.

From your bill, if you know it — the field is always editable.

Ontario prices: Ontario Energy Board — Regulated Price Plan Price Report (October 16, 2026) — verified November 19, 2026.

The lines on your bill that do not depend on usage — a customer or flat delivery charge. Leave at zero to see the energy cost alone.

Your estimated bill

468 kWhused per month
$42.59energy cost per month
$0.00fixed charges
$42.59estimated total per month
$511.06estimated total per year

Monthly figures use a 30-day month.

Defaults are estimates — your bill is the authority. Find your true rate from your bill.

Per-appliance breakdown

What each item on your list uses and costs per month
AppliancekWh per monthCost per month
Refrigerator108$9.83
Space Heater (portable electric)360$32.76
Total468$42.59

What's not included

This estimator prices the electricity your items use, at the rate you set. Delivery charges, regulatory charges and taxes are not included — add the fixed lines from your bill in the fixed-charge field above if you want them counted, or use the Cost per kWh Calculator to fold everything into one all-in rate. Ontario prices shown are the Regulated Price Plan energy charge only, and the Ontario Electricity Rebate reduces the pre-tax subtotal on a real bill.

How it works

The estimator treats your home as a list. Each item contributes its watts multiplied by its hours per day, its quantity and 30 days — its share of the month's kilowatt-hours. The items' kWh are added together, priced at the single rate you choose, and your fixed charge, if any, is added last. That mirrors how a real bill is assembled: usage first, then the fixed lines. If one item dominates the list, it dominates the estimate, exactly as it would dominate the bill.

Worked example

Fridge: 150 W × 24 h × 30 days = 108 kWh · Space heater: 1,500 W × 8 h × 30 days = 360 kWh · Total 468 kWh × 14.6¢ = $68.33 per month

The two seeded items are a fridge and a space heater. The fridge, at its typical 150 W draw across the whole day, uses 108 kWh a month; the heater, at 1,500 W for eight hours a day, uses 360 kWh. Together that is 468 kWh — at Ontario's mid-peak price, $68.33 a month with no fixed charge added, or $80.33 with a $12 fixed charge. Replace the seeds with your own appliances and the same arithmetic builds your estimate.

What changes the answer

One or two items dominate. In the seeded example the space heater alone is 77% of the energy. Most homes have the same shape: heating, cooling, hot water and drying swamp everything else, while lights, screens and chargers are rounding errors. If you are estimating to find savings, spend your accuracy on the big items' hours and let the small ones be rough.

Real bills cover 28 to 31 days, not exactly 30. This estimator uses a 30-day month, so a February bill will read a little lower and a 31-day month a little higher than the estimate for the same habits. The difference is a few percent — noticeable if you compare line by line, irrelevant for deciding what to fix.

Season swings are usage swings. The same home can use half again as much in January as in May if it heats or cools electrically. An estimate built from winter items will overshoot a summer bill and vice versa. Build the list for the season you are asking about — or build both and treat the truth as somewhere between them.

The rate is a choice in Ontario. One list, three prices: the seeded items cost $42.59 a month priced entirely off-peak and $88.45 priced entirely on-peak. Real usage spreads across the blocks, so a single-rate estimate is a simplification — the time-of-use calculator on this site does the full plan comparison when the split matters.

The seeded example at three Ontario prices

The same two items — fridge and space heater, 468 kWh in total — priced at each of Ontario's time-of-use rates. Only the clock changes.

Monthly energy cost of the example list by time-of-use price
PriceFridgeSpace heaterTotal energy
Time-of-Use · Off-peak (9.1¢/kWh)$9.83$32.76$42.59
Time-of-Use · Mid-peak (14.6¢/kWh)$15.77$52.56$68.33
Time-of-Use · On-peak (18.9¢/kWh)$20.41$68.04$88.45

Prices: Ontario Energy Board — Regulated Price Plan Price Report (October 16, 2026), verified November 19, 2026. Energy charge only — delivery, regulatory charges and tax are additional on a real bill.

Frequently asked questions

How does this bill estimator work?

You build a list of the appliances you want to count. For each one, the estimator multiplies watts by hours per day by 30 days to get monthly kWh, prices it at your rate, and adds the items together. The seeded example — a fridge and a space heater — totals 468 kWh a month, which at Ontario's mid-peak price of 14.6¢ per kWh is $68.33 of electricity. Add a fixed charge if you want the fixed lines from your bill counted too.

Why is my real bill higher than the estimate?

Because the estimate prices the electricity itself, and a real bill adds delivery charges, regulatory charges and tax on top of the energy charge. Those extras are not in this estimate unless you add them: put the fixed lines from your bill — the customer or delivery base charge — into the fixed-charge field, or use the cost-per-kWh calculator to work out your single all-in rate from a real bill and run this estimator at that rate instead.

How much of the example bill is the space heater?

Most of it. The heater accounts for 360 of the example's 468 kWh — about 77% — and $52.56 of its $68.33 energy cost at mid-peak prices. The fridge, running all day, uses barely a third as much. That is the usual shape of a home bill: one or two heating or cooling appliances dominate, and everything else is rounding.

What should I put in the fixed-charge field?

The charges on your bill that do not depend on how much electricity you use — typically a customer charge or a flat delivery charge. Leave it at zero for the energy cost alone. In the worked example, a $12 fixed charge lifts the monthly total from $68.33 to $80.33 — why two households with identical usage can still get different bills.

How can I check this estimate against my real bill?

Compare the kWh first, before the dollars. Your bill states the kWh you actually used; if the estimator's total is close, your list is honest and any remaining gap is charges and tax, not usage. If the kWh is far off, an item's hours are wrong — usually a heating or cooling appliance. For the money side, divide your bill's total by its kWh on the cost-per-kWh calculator to get your true all-in rate.